We may earn a commission if you buy software through links on this site. How we make money

How Much of Your HVAC Techs’ Paid Time Actually Gets Billed?

An HVAC service tech paid for 40 hours bills 27 of them: 67.5% utilization, 13 hours a week unpaid. The worked example, what a 75% target recovers, and where the lost hours go.


TradeProStack Editorial Desk Avatar

·

6–10 minutes
How Much of Your HVAC Techs’ Paid Time Actually Gets Billed?

How Much of Your HVAC Techs’ Paid Time Actually Gets Billed?

An HVAC shop pays every technician for a full week. The question is how much of that week turns into invoiced work. If a tech is paid for 40 hours and only 27 of them appear on customer tickets, 13 hours a week are going somewhere unpaid. Over a year, that is 676 hours. This guide works through one HVAC service tech’s week in the technician utilization calculator for HVAC so you can see what the number means, what a realistic target recovers, and where the lost hours usually go.

Utilization is a diagnostic number, not a ranking. It tells you whether the week was spent on billable work or on everything around it. Used that way, it points at dispatch, routing, callbacks, and truck stock instead of at the technician.

What counts as billable time for an HVAC tech?

The calculator asks for three inputs: paid hours per week, billable hours per week, and a target utilization. It also offers an optional breakdown of where the non-billable hours go. Before you enter anything, settle what counts in each box, because the whole result depends on it.

Billable means invoiced to a customer. Wrench time on site counts. Drive time between calls does not. A callback you cannot invoice does not. Training, paperwork, and waiting for the next job do not. If an hour does not appear on a ticket, it is a paid hour, not a billable hour.

Paid hours means every hour you pay the technician for, including all the non-billable time. That is the denominator. A tech on a 40-hour week who picks up four hours of overtime is paid for 44 hours that week, and the calculator needs 44, not 40. Using scheduled hours instead of paid hours flatters the result and hides the real gap.

The target is the utilization you want to reach. Set it from the technician’s own history, a realistic step above where they are now. The calculator shows how many extra billable hours a year that target is worth, but only when the target sits above the current number.

Worked example: one HVAC service tech, one ordinary week

Take a residential service tech in a normal week with no holiday and no callouts. The numbers below are illustrative, chosen to show the math. Enter your own hours in the technician utilization calculator for HVAC to get your shop’s real figure.

The tech is paid for 40 hours and records 27 billable hours. Here is what the calculator returns:

FigureCalculationResult
Billable utilization27 ÷ 40 × 10067.5%
Non-billable hours per week40 − 2713 hours
Billable hours per year27 × 521,404 hours
Non-billable hours per year13 × 52676 hours
Extra billable hours at a 75% target(75% − 67.5%) × 40 × 52156 hours

Engineer in gloves adjusting valves on an industrial heating system

At 67.5%, roughly a third of the paid week is not billed. That is not automatically a problem. Every HVAC tech loses hours to driving, parts runs, and paperwork. The number becomes useful when you ask what it would take to move it and what that move is worth.

What does a 75% target recover?

Set the target at 75% and the technician utilization calculator for HVAC shows 156 extra billable hours a year for this tech. That is the gap between 67.5% and 75% across a 52-week year: 0.075 × 40 × 52.

To put a dollar figure on it, assume an illustrative billed rate of $150 an hour. The rate is an assumption for this example only; the calculator does not ask for one. If you have not worked out what your techs’ time should actually be charged at, the labour rate calculator for HVAC builds that rate from wages and overhead. At that rate, 156 hours is $23,400 a year in recovered revenue potential for one technician. With three techs at the same utilization, the same move is worth 468 hours, or $70,200 at the same illustrative rate.

Look at it the other way. One extra billable hour a day, five a week, takes this tech from 27 to 32 billable hours. Utilization rises to 80%. Over a year that is 260 extra billable hours, or $39,000 at the illustrative $150 rate. The point is not the rate. The point is that small weekly changes compound across 52 weeks, and the calculator’s what-if line makes that visible before you change anything in the field.

Why the same tech looks different in July and February

Utilization moves with the season, and an HVAC shop that ignores that will misread its own numbers. In a peak July week, the same tech might record 33 billable hours out of 40. That is 82.5% utilization, with only 7 non-billable hours a week, or 364 a year. In a slow February week, the same tech might record 24 billable hours. That is 60%, and the shortfall against a 75% target is 312 hours a year on an equivalent basis.

Neither week is the tech’s real utilization. The useful reading is a rolling average across the season, compared against the tech’s own history. A residential service tech and a commercial install tech will never have comparable numbers either, because their service mix is different. Use utilization to diagnose routing, truck stock, and dispatch gaps, not to rank technicians against each other.

Where do the 13 non-billable hours go?

The calculator’s optional breakdown is where the diagnosis starts. For the worked example, the 13 non-billable hours split like this:

  • Drive time between calls: 5 hours
  • Uninvoiced callbacks: 2 hours
  • Parts runs: 2 hours
  • Paperwork and training: 2 hours
  • Idle time and waiting for the next job: 2 hours

Those five lines add to exactly 13, so the breakdown reconciles with the non-billable total. If your own lines do not add up, the gap is unaccounted time, and that is normal on a first pass. Most shops cannot categorize every hour right away. The gap itself is useful: it is the first place to investigate when utilization looks low.

Missed calls are a separate leak: a call that never becomes a booked job is billable time that never existed. The missed call cost calculator for HVAC puts a number on that gap.

Drive time is the biggest line here, and it is the one dispatch can move. Five hours a week is 260 hours a year per tech. Tighter territories, better call sequencing, and fuller truck stock all show up in this line before they show up anywhere else. Callbacks are the second line worth attention. Two uninvoiced callback hours a week is a quality or parts problem, and it costs twice: once in the lost billable hour, and once in the return visit. Parts runs point at truck stock. If a tech leaves a job to fetch a part twice a week, the fix is inventory, not effort.

Common input mistakes

Four mistakes show up again and again, and each one makes the result useless in a different way.

Counting drive time as billable

Add the 5 drive hours to the 27 billable hours and the calculator shows 80% instead of 67.5%. The number looks better and the routing problem disappears from view. Drive time is paid time, not billable time, unless the customer is actually invoiced for it.

Using scheduled hours instead of paid hours

A tech scheduled for 40 hours who is paid for 44 with overtime needs 44 in the denominator. Enter 27 billable hours against 44 paid hours and utilization is 61.4%, not 67.5%. Using the scheduled figure understates the gap by six points.

Comparing technicians with different service mix

A residential service tech and a commercial install tech do different work in different places. Their utilization numbers measure different weeks. Compare each technician against their own history, and compare the shop against its own past seasons.

Borrowing a target from another shop

A target only works if it is reachable from where this tech actually is. A shop that jumps from 67.5% to a borrowed 90% target will miss it, lose confidence in the number, and stop tracking. Pick a realistic step above the current figure, close it, then set the next one.

Frequently asked questions

What counts as a billable hour?

Time you invoice to a customer: the work on site that appears on the ticket. Drive time between calls, callbacks you cannot invoice, training, paperwork, and waiting for the next job are paid hours, not billable hours.

What utilization should an HVAC shop target?

Set it from your own history. Pick a realistic step above where you are now. Closing even a few points recovers real hours over a year, as the what-if line in the technician utilization calculator for HVAC shows.

Should I compare technicians against each other?

Only technicians with a similar service mix. A residential service tech and a commercial install tech will never have comparable numbers. Use utilization to diagnose routing, truck stock, and dispatch gaps, not to rank.

Does the breakdown change the utilization number?

No. The where-it-goes breakdown is a diagnostic aid. It reconciles against your non-billable total but does not change the calculation. Its job is to show you which kind of lost time to fix first.

Run your own numbers

Enter your tech’s paid and billable hours in the free technician utilization calculator for HVAC and see the yearly capacity, the non-billable breakdown, and what a higher target would add.

Open the Technician Utilization Calculator

Photos: Rene Terp and MOBO Modular Boiler Rooms via Pexels.