We may earn a commission if you buy software through links on this site. How we make money

Profit Per Job Calculator for Electrical Contractors: Lighting Retrofit Example

Illustrative lighting retrofit: $9,800 price, $7,600 costs, $2,200 profit at 22.4% margin, worked from the profit per job calculator for electrical contractors.


TradeProStack Editorial Desk Avatar

·

7–10 minutes
Profit Per Job Calculator for Electrical Contractors: Lighting Retrofit Example

An electrical contractor can finish a run of lighting retrofits, keep crews busy for weeks, and still end the month unsure which jobs actually paid. A full schedule is not the same as a profitable job list. A profit per job calculator electricians use closes that gap by turning each estimate into a clear profit and margin before the work starts.

The question per job is simple: after labour, materials, and every other cost of that specific job are paid, what is left? The free profit per job calculator for electrical contractors answers that question one job at a time. Enter the price and what the job cost, and it shows the profit in dollars and the margin as a percentage.

How does a profit per job calculator electricians use work?

The profit per job calculator electricians use takes four inputs and turns them into two results. For an electrical contractor, those inputs are:

1. Job price. Enter the price charged for the job: the selling price for that one retrofit, not a monthly total.

2. Labour cost. Enter what the crew cost for this job. Use the loaded labour cost: wages plus employer burden such as payroll taxes, workers compensation, and benefits. The calculator’s own guidance gives the scale of the difference: a wage of $25 per hour costs $30 to $33 per hour once burden is included. Pricing labour at the wage alone understates the real cost of the crew. If the loaded rate is not already known, the labour rate calculator can work it out first.

3. Materials cost. Enter what the materials for this job cost: fixtures, drivers, wire, and any other materials installed on that job.

4. Other costs. Enter everything else the job cost beyond labour and materials: permits and inspection fees, disposal, equipment rental, subcontractors, and card processing fees. For a lighting retrofit, the lift rental and the disposal bill belong here, not in a forgotten corner of the estimate.

Here is how the profit per job calculator electricians rely on turns those four inputs into a result:

Profit = job price minus (labour + materials + other costs)

Profit margin = profit divided by job price

The result is gross profit for that one job — the figure a profit per job calculator electricians use reports before fixed overhead such as rent, insurance, and office costs. It shows whether the retrofit itself made money, not whether the business was profitable for the month. The tool is free, requires no signup, and was built by the TradeProStack Research Desk.

Worker fitting a long ceiling light fixture against a white ceiling

What did one lighting retrofit earn on the profit per job calculator for electrical contractors?

Let us run this profit per job calculator electricians use on an illustrative example: an electrical contractor pricing a commercial lighting retrofit.

All figures below are illustrative, not actual market prices or a quote for a real property.

Step 1: Enter the job price

The illustrative job price is $9,800, the amount charged for this one retrofit.

Step 2: Enter the loaded labour cost

The illustrative loaded crew cost is $3,600, already including employer burden. It is the full cost of the crew on this job, not the wage total alone.

Step 3: Enter the materials cost

The illustrative materials cost is $3,200, covering fixtures, drivers, and wire.

Step 4: Enter the other costs

The illustrative other costs total $800: $400 for lift rental, $250 for disposal, and $150 for the permit and inspection. Each part is small on its own, but together they are $800 out of the job price.

$400 + $250 + $150 = $800

Step 5: Work out total costs, profit, and margin

Now combine them:

$3,600 + $3,200 + $800 = $7,600

$9,800 – $7,600 = $2,200

$2,200 / $9,800 = 22.4%

The illustrative result is $2,200 profit at a 22.4% margin for this retrofit.

Here is the complete calculation:

Profit componentIllustrative amount
Job price$9,800.00
Labour (loaded crew cost)$3,600.00
Materials$3,200.00
Other (lift rental $400 + disposal $250 + permit and inspection $150)$800.00
Total job costs$7,600.00
Profit$2,200.00
Profit margin22.4%

What does a 22.4% margin change for an electrical contractor?

The guidance behind the profit per job calculator electricians use puts this result in context: a gross margin of 20% to 30% per job is a common target for small trade businesses.

At 22.4%, this illustrative retrofit sits inside the target range, near its low end. It clears the 15% floor comfortably, so the retrofit is not losing ground, but there is little room for a cost overrun before it slips toward the floor. The contractor should check the price before the next estimate goes out.

One way to use that information is to ask what price the same retrofit would need at a 30% margin. Divide the total costs by 0.70: $7,600 / 0.70 = $10,857.14.

At that price with the same costs, the profit would be $3,257.14 and the margin would be 30%: a $1,057.14 higher price than the illustrative $9,800, showing exactly what the margin target is worth in dollars on this retrofit. At four such retrofits a month, the $2,200 per retrofit totals $8,800 before fixed overhead.

The practical decision is whether to hold the current price, lift it toward the 30% target price, or cut a cost such as the lift rental by scheduling retrofits in the same building together. A full schedule alone cannot make that call. The per-job margin can.

What mistakes can throw off an electrical contractor’s profit check?

Small differences in how costs are entered can produce noticeably different profit figures. Here are four mistakes worth checking before trusting a result.

Mistake 1: Entering wages instead of loaded labour

Suppose the contractor enters $2,900 in wage-only labour instead of the $3,600 loaded crew cost. The calculation changes: costs become $2,900 + $3,200 + $800 = $6,900, apparent profit becomes $9,800 – $6,900 = $2,900, and apparent margin becomes $2,900 / $9,800 = 29.6%.

Compare that with the original result:

$2,900 – $2,200 = $700 per retrofit

At four illustrative retrofits a month, that is $700 x 4 = $2,800 a month of profit that does not exist, because the burden on the crew’s wages was left out. If you are unsure what your crew truly costs per hour, use the labour rate calculator to work out the loaded rate first.

Mistake 2: Leaving other costs at zero

Suppose the contractor enters $0 for other costs, forgetting the lift rental, the disposal bill, and the permit and inspection fee. The calculation changes: costs become $3,600 + $3,200 + $0 = $6,800, apparent profit becomes $9,800 – $6,800 = $3,000, and apparent margin becomes $3,000 / $9,800 = 30.6%.

That overstates profit by $800 per retrofit, the exact amount of the lift, disposal, and permit costs left out. Lift rental and permits are costs of this specific retrofit, not overhead to be absorbed elsewhere, and the calculator only counts them if they are entered.

Mistake 3: Judging a retrofit by profit dollars alone

Suppose a larger job is priced at $18,500 with costs of $16,200. The profit is $2,300, which is $100 more than the $2,200 from the base example. But the margin is $2,300 / $18,500 = 12.4%, below the calculator’s 15% floor.

The bigger job brings more profit dollars and a thinner margin at the same time, leaving less room for a cost overrun, a callback, or a materials price increase. Dollars alone do not show that risk. The margin percentage does.

Mistake 4: Treating gross profit per job as business profit

Treating the $2,200 from the base example as the month’s profit makes the company’s fixed costs disappear from the picture. Rent, insurance, and office costs still come out of the gross profit of all the month’s jobs combined. The calculator answers whether one retrofit made money, not whether the business made money for the month.

Frequently asked questions

What profit margin should an electrical contractor target per job?

The guidance in this profit per job calculator electricians use identifies 20% to 30% gross margin per job as a common target for small trade businesses.

Should labour cost be the wage or the loaded cost?

Always use the loaded cost. The calculator’s guidance gives the scale of the difference: a $25 per hour wage costs $30 to $33 per hour once employer burden is included. Pricing labour using wages alone makes every retrofit look more profitable than it is (see Mistake 1). The labour rate calculator can work out the loaded hourly cost if it is not already known.

What goes in other costs for a lighting retrofit?

Include anything the job costs beyond direct labour and materials: permits and inspection fees, lift rental, disposal fees, equipment rental, subcontractors, fuel for the job, and card processing fees. Group smaller expenses together, but do not leave the field at zero. In this guide’s example, lift rental at $400 and disposal at $250 are the two items most easily forgotten, and together they are $650 of the $800 other-costs total.

The calculator says the retrofit lost money. Now what?

Start by checking the inputs, especially the loaded labour cost and anything entered under other costs. A negative result means the job is losing money on the numbers entered. It is not a calculator error. If the loss is accurate, the options are to raise the price, reduce the cost, or stop taking that type of work. The 30% margin check above gives the price that would have been needed, so the next estimate can be set from a known target.

How can you check your next retrofit?

For each new retrofit, open a profit per job calculator electricians can use, enter the price, the loaded crew cost, the materials, and the other costs, then read both results: profit in dollars and margin as a percentage. Compare the margin with the 20% to 30% common target and the 15% floor, and check the price a higher target would require before the estimate goes out.

If the price itself still needs to be built, the job quote calculator can turn labour, materials, overhead, and a target margin into a selling price. Run the price through the profit per job calculator for electrical contractors afterwards to confirm what the retrofit actually keeps.

These calculations are pricing illustrations, not financial advice. Actual profits and margins will depend on the work and your company’s circumstances.

Try this calculator: Run your own retrofit figures through the free profit per job calculator for electrical contractors and compare the margin with the 20% to 30% target range before the next estimate goes out.

Photos: worker testing equipment at indoor electrical panels by Fatih Yurtman on Pexels; worker fitting a long ceiling light fixture by Antoni Shkraba on Pexels.