Many HVAC shops charge one hourly rate for every kind of labour. The service tech and the install lead both bill at the same number, because one rate is simpler to quote. Simpler is not the same as accurate: a single rate can hide a shortfall on one kind of work behind a surplus on another.
This guide works through the free labour rate calculator for HVAC with an illustrative HVAC shop that has both roles. You will see what each input means in HVAC terms, how the calculator works out a rate for each role, and what the result changes about pricing service and install work. All example figures are illustrative; the calculator uses the same math with your own figures.
What does the labour rate calculator for HVAC need?
The calculator needs six inputs, and each one can move the result enough to matter. Check where each number comes from before entering it.
- Hourly wage. What you pay the tech per hour before additional employment costs. For an owner-operator, use what you would pay someone else to do the work.
- Employer burden (%). Costs on top of wages, including CPP and EI contributions, workers compensation premiums, vacation pay, stat holidays, and benefits. Check a payroll summary for the actual figure. Nothing on the calculator page hard-codes CRA rates, so check your numbers against CRA figures for the relevant tax year before using them to quote work.
- Paid hours per year. A full-time tech is paid for about 2,080 hours a year (40 hours times 52 weeks), including non-billable time.
- Utilization (%). The percentage of paid hours that can actually be billed to customers. This is where service and install work diverge most. Driving between calls, diagnostics that do not lead to a repair, callbacks, quoting, and paperwork all take paid time for a service tech. An install crew spends most of the day on site, so its utilization is usually higher.
- Monthly overhead. Costs the business carries whether jobs come in or not: truck payments, fuel, insurance, shop rent, phones, software, and accounting. For one tech’s rate, enter that tech’s share, not the whole shop’s overhead.
- Target profit (%). The margin you want after covering all costs. The calculator divides by (1 minus profit%), so a 15% target means profit is 15% of the final rate, not a 15% markup on cost.
The worked example: one HVAC shop, two very different rates
Say you run a small HVAC shop with one service tech and one install lead, charging $110 an hour for all labour. The table lists the six inputs the labour rate calculator for HVAC uses for each role.
| Input | Service tech | Install lead |
|---|---|---|
| Hourly wage | $36.00 | $42.00 |
| Employer burden | 24% | 24% |
| Paid hours / year | 2,080 | 2,080 |
| Utilization | 55% | 80% |
| Monthly overhead (share) | $1,600 | $2,100 |
| Target profit | 15% | 15% |
Enter the service tech’s figures first. Annual pay is $36.00 times 2,080, which is $74,880.00. Employer burden at 24% adds $17,971.20, bringing loaded pay to $92,851.20. Annual overhead is $1,600 times 12, which is $19,200.00. Annual loaded cost is therefore $112,051.20. Billable hours are 2,080 times 55%, which is 1,144 hours. Loaded cost per paid hour is $112,051.20 divided by 2,080, which is $53.87. The break-even billable rate is $112,051.20 divided by 1,144, which is $97.95 per hour. The rate with 15% profit is $97.95 divided by 0.85, which is $115.23 per hour.
Now the install lead. Annual pay is $42.00 times 2,080, which is $87,360.00. Employer burden at 24% adds $20,966.40, bringing loaded pay to $108,326.40. Annual overhead is $2,100 times 12, which is $25,200.00. Annual loaded cost is therefore $133,526.40. Billable hours are 2,080 times 80%, which is 1,664 hours. Loaded cost per paid hour is $133,526.40 divided by 2,080, which is $64.20. The break-even billable rate is $133,526.40 divided by 1,664, which is $80.24 per hour. The rate with 15% profit is $80.24 divided by 0.85, which is $94.40 per hour.
The install lead earns more per hour, yet needs a lower charge-out rate. Utilization explains the gap: the install lead bills 1,664 hours against which to spread the loaded cost, while the service tech bills only 1,144. One rate cannot reflect two very different billable-hour bases.
What does the $110 blended rate actually do?
Running both roles through the labour rate calculator for HVAC makes the gap visible. Compare the $110 blended rate with each role’s profit-target rate. For service work, $110 falls $5.23 per hour short of the $115.23 target rate. Over 1,144 billable hours, that shortfall is $5,983. For install work, $110 sits $15.60 per hour above the $94.40 target rate. Over 1,664 billable hours, that surplus is $25,958.
Those two figures are not the same kind of problem. The blended rate still covers the service break-even rate of $97.95, so service work at $110 is not losing cash on every hour. It is missing its profit target by $5.23 an hour. Install customers, meanwhile, are paying $15.60 an hour more than the install target rate requires. The blended rate cross-subsidizes service work with install work invisibly: no single invoice shows the gap.
The fix is to set two rates and use each one where it belongs: $115.23 for service labour and $94.40 for install labour, rounded to the shop’s normal rounding in the price book. Diagnostic visits, repairs, and maintenance calls carry the service rate. Changeouts and other install labour carry the install rate. Do not net the two annual figures: they belong to different techs.
Why does utilization move the service rate more than wages do?
Keep the service tech’s costs the same and change only utilization. At 65%, billable hours rise from 1,144 to 1,352, the break-even rate falls to $82.88, and the rate with 15% profit falls to $97.50: $17.73 per hour below the 55% rate, from a 10-point change in one input, without cutting wages or insurance costs.
Seasonal swing makes the same point in the other direction. At 45% utilization, the pattern of a slow shoulder season, the service rate with 15% profit rises to $140.84. No shop should set its year-round service rate from one season’s figure in either direction. Use a full-year average of billed hours against paid hours, drawn from invoices. To check the actual figure, use the technician utilization calculator, which calculates utilization from paid and billable hours.

What should an HVAC shop do with the two rates?
Put each rate into the matching price book. If you quote install work from a flat-rate book, build the labour portion of each install task price from the $94.40 install rate, not from the blended $110. If you quote service work hourly or from a service price book, use the $115.23 service rate. A task price built on the wrong rate carries the blended-rate error into every quote that uses it.
Re-run the calculation when the inputs change. Wage increases, a new truck, higher rent, a change in crew mix, and a shift in how much driving the service board requires can all change a required rate. Recalculate at least twice a year and whenever a tech receives a raise. Running the labour rate calculator for HVAC again takes a few minutes, so there is no reason to let a stale rate ride through a full season.
What mistakes throw off an HVAC labour rate?
Each mistake below changes what the labour rate calculator for HVAC returns, so check them before trusting a rate.
- Using one blended rate for unlike roles. Service and install roles differ in wage, utilization, and overhead share, and one rate averages those differences away instead of pricing them.
- Pricing on a peak-season utilization figure. Setting the service rate from 70% utilization, a busy-summer pattern, gives $90.54 with 15% profit: $7.41 per hour below the true $97.95 break-even at 55% utilization, or $8,477 over the true 1,144 billable hours. Pricing the whole year on a peak month builds a shortfall into every service hour.
- Using take-home pay as the wage. Enter gross wages. The calculator adds employer burden separately, so take-home pay understates the tech’s cost twice over: once in the wage and once in the burden calculated on it.
- Guessing burden instead of checking payroll. Add CPP, EI, workers compensation, vacation pay, and benefits from an actual payroll month. The full cost can be higher than expected.
- Counting only on-site time as paid hours. Use all 2,080 paid hours. Driving, diagnostics, callbacks, and paperwork belong in the utilization calculation, not outside the paid-hours figure.
- Treating the output as a quote. The result gives labour rates for pricing work; individual quotes still need parts, permits, disposal, and other job-specific costs.
Frequently asked questions
Should every tech in the shop have the same rate?
Not necessarily. A service tech and an install lead have different wages and utilization, so their break-even rates differ. Calculate each rate first, so you know which kind of work a single rate under-prices.
Does this replace flat-rate pricing?
No. The calculated rates are inputs for flat-rate pricing: task prices use expected hours times the matching labour rate, plus parts and markup. An outdated rate in the pricing book makes task prices wrong in the same direction.
What if the calculated rate is well above the local market?
Review the inputs first, particularly utilization and overhead. Better routing, properly stocked trucks, and fewer callbacks may improve billable hours. Charging below break-even to match competitors means absorbing a loss, so a rate above the market is a prompt to check costs, not to ignore the calculation.
How often should an HVAC shop recalculate its rates?
At least twice a year and whenever wages change. Insurance renewals, new truck payments, and slower months can also affect the rate.
How should HVAC shops use this on the next rate review?
Run the service tech and the install lead through the labour rate calculator for HVAC separately and set the two rates from their own costs: $115.23 for service labour and $94.40 for install labour, instead of $110 for both. The result is a planning estimate, not financial or tax advice. Check burden figures against payroll and CRA figures before the rates go into quotes. More free pricing and quoting calculators are on the free tools hub.
Try this calculator: Run your own service and install figures through the free labour rate calculator for HVAC and compare each role’s break-even and profit-target rate with the rate you charge today, using a full-year utilization figure for each role.
Photos: two technicians repairing a rooftop HVAC unit by José Andrés Pacheco Cortes on Pexels; close-up of a technician working on an air-conditioning unit with tools by José Andrés Pacheco Cortes on Pexels.








